What are the Design Elements of Injection Mold Service?
You are here: Home » Case Studies » Injection Molding » What are the Design Elements of Injection Mold Service?

What are the Design Elements of Injection Mold Service?

Publish Time: 2021-10-08     Origin: Site

The design and manufacture of injection molds are closely related to plastic processing. The success or failure of plastic processing depends largely on the effectiveness of mold design and the quality of mold manufacturing, and the design of injection molds is based on the correct design of plastic products.



The following is an introduction to the design elements of injection molding services.


Parting surface

Structural parts

Mold accuracy

Pouring system

Plastic shrinkage rate and factors affecting the dimensional accuracy of the product


Parting surface

The parting surface is the contact surface where the concave mold and the convex mold fit together when the injection mold is closed. Its location and form are influenced by the shape and appearance of the product, wall thickness, molding method, post-processing process, mold type and structure, demolding method and molding machine structure, etc. The injection molding service provided by our company pays much attention to this aspect of design.


Structural parts

Structural parts are the slider, slant top, and straight top blocks of complex molds. The design of structural parts is very critical, which is related to the life of the mold, processing cycle, cost, product quality, etc. Therefore, the design of the core structure of complex molds requires a high level of comprehensive ability of the designer to pursue a simpler, more durable, and more economical design solution as much as possible. Our company's injection molding service provides structural parts that are very user-friendly.


Mold accuracy

Mold accuracy means avoiding card, precise positioning, guide pillar, positioning pin, and so on. The positioning system is related to the appearance quality of products, mold quality, and life, according to the different mold structures, choose different positioning methods, positioning accuracy control mainly relies on processing, internal mold positioning is mainly the designer to fully consider, design a more reasonable and easier to adjust the positioning method. Our company provides high precision injection molding service.


Pouring system

Pouring system is the feeding channel between the injection molding machine nozzle and the cavity, including the main flow channel, the diversion channel, the gate, and the cold cavity. In particular, the location of the gate should be selected to facilitate the molten plastic in a good flow state filled cavity, attached to the product of the solid runner and gate cold material is easy to eject from the mold and be removed when the mold is opened (except for hot runner mold).

Plastic shrinkage rate and factors affecting the dimensional accuracy of the product


Many factors affect the dimensional accuracy of products, such as mold manufacturing and assembly errors, mold wear, etc. In addition, when designing compression and injection molds, the process and structural parameters of the molding machine should be considered to match.


Team Rapid MFG Co., Ltd. has been providing injection molding services for many years and is known for the high quality of its products. Our company has a professional R&D team and perfect after-sales service to make your purchase worry-free.


Contact us

Related Products

TEAM MFG is a rapid manufacturing company who specializes in ODM and OEM starts in 2015.

Tel

+86-0760-88508730

Phone

+86-15625312373
Copyrights   2024 Team Rapid MFG Co., Ltd. All rights reserved.